E-coat finish gives a uniform density of coating over the whole part regardless of the complexity of the product. This surface finish provides a hard surface coupled with good chemical resistance giving excellent wear properties and is an excellent alternative to powder coating on many applications.
OURS technology, mature process, rich experience, customized design, best solution. Please contact us to customize a ED coating line for your own.
Electrophoretic paint (E Coat) is now the finish of choice within the automotive industry where high corrosion resistance is required on sub frame components. This is generally far more durable and offers a low cost alternative to powder coating and is becoming ever more popular is general industrial or retail applications where a high corrosion resistance and aesthetically pleasing finish is required.
E-coat Epoxy Type (electrophoretic painting) offers a high corrosion resistance, normally in excess of 1000 hours salt spray resistance as well as an excellent aesthetic appearance.
When applied to such coatings such as phosphate, zinc or zinc-nickel the corrosion properties can be increased even further. In addition, unlike sprayed or dipped coatings the E-coat finish gives a uniform density of coating over the whole part regardless of the complexity of the product. This surface finish provides a hard surface coupled with good chemical resistance giving excellent wear properties and is an excellent alternative to powder coating on many applications.
 |
| Motorcycle carriage cathodic electro-coating line |
E-coating is a method of painting which uses electrical current to deposit the paint. The process works on the principal of "Opposites Attract". This process is also known as electrodeposition or KTL (Kathodische Tauchlackierung), cathodic dip painting
The e-coat process can be separated into four basic zones:
Pre-treatment
Electrocoat Bath and Ancillary Equipment
Post Rinses
Bake/ Cure/ Dry Oven
High efficiency: Electrophoretic coating line can realize continuous or intermittent automatic production, which improves the production efficiency and quality stability.
Superior performance: Electrophoretic coating line can make the surface coating of the coated object uniform, dense, smooth, with good adhesion, corrosion resistance, wear resistance and other properties.
Energy saving and environmental protection: The electrophoretic coating line adopts closed cycle spraying system, which meets the requirements of environmental protection.
| Process | Remark | |
| Pretreatment | Dip tank type | Thoroughly clean the workpiece with dead angles |
| Spraying type | With pressure, more cleaner | |
| Water Drying | Fully automatic | Heating energy can be electricity, natural gas, diesel, LPG or others |
| Electrophoresis Coating | Dip tank type | Fully automatic, can be continuous type, or crane step by step |
| Paint Drying | Batch type | Suit for semi-automatic coating line |
| Tunnel type | Common use, no limitation, easy to install | |
| Camel back type | Save fuel, good heat preservation | |
| Conveyor | Electric hoist | Simple type, save cost |
| Gantry type | Crane, automatic | |
| Continuous line | Fully automatic, speed can be adjusted | |
OURS technology, mature process, rich experience, customized design, best solution.
Please contact us to customize a ED coating line.
Copyright © 2025 Yangzhou OURS Machinery Co., Ltd.All rights reserved. - Privacy policy
EN
